industrial repair agent > rubber lining pipeline epoxy resin adhesive repair agent

rubber lining pipeline epoxy resin adhesive repair agent

BD436 desulfurization rubber lining pipeline epoxy resin adhesive compound
repair agent

Product description of BD436 desulfuration rubber liner pipeline repair agent
sealing compound epoxy adhesives:
It is the high performance wear resistant,corrosion resistant polymerization ceramic material which compounded by
various high performance abrasion resistant,corrosion resistant materials(like ceramic,silicon carbide,carborundum,
titanium alloy etc.) and modified toughening heat resistant resin.Two-component,paste,the facade is not flowing,
can be coating construction with scraper or tongue plate

Product usage of BD436 rubber lining pipeline sealing epoxy
compound adhesive repair agent:
It’s suitable for the construction of vertical surface and top face,it can form the surface smooth,corrosion resistant,
wear resistant protective coating after curing.Repair all kinds of high temperature corrosion of pump,valve,pipeline,
heat exchanger,end plate,blade,reaction kettle.Especially for the repairing of tank liners,pipeline lining,chemical storage
tank lining based on the damage,falling off,with excellent results.

How to use:
1.Surface treatment: clean up the residual of rubber lining damage parts and do the rust cleaning and
coarsening processing for the pending-repair parts,clean it with cleaning agent (acetone,ethyl acetate,etc.)
and dry it by airing
　　
2.Configuration: Make the A and B two components mix uniformly according to the mass ratio A:B=4:1,
and use it up within specified operation time limit.(When the temperature is low in winter,can heat up the
A component by water bath in advance for easy to mix.
　　
3.Coating:Make the mixed-up material smear on the pending-repair part layer by layer,the coating should be compacted,make it infiltrate fully with the substrates,
avoid appearing the holes in the coating.
　
4.Curing:it can be put into using after curing for 24 hours at the temperature of 25-30 degree,if the temperature is below 15 degree,should heat it up to promote the coating fully curing.(generally after the coating initial curing,generally use the iodine-tungsten lamp to bake for 2 hours
with the 30cm distance from the coating)

Performance index:

Color	Physical state	Density (g/cm3)	Compressive strength (Mpa)	Tensile strength (Mpa)	Operation time (Min)	Curing time	The highest working temperature	Shear strength (Mpa)	Bending strength (Mpa)
Gray	paste	1.38	100	35	30	24h	-60-250	25	56

Packaging specification:
Two-component,10kg/group,packed in a plastic drum.

Storage and Warranty:
1.Sealed storage in the cool and dry place.The warranty period is 12 months.
2.Avoid placing it upside down,knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD436 desulfuration rubber liner pipe two parts paste epoxy repair compound adhesives:

------分隔线----------------------------